Monacor spikes installed on the Visaton Clou loudspeakers
After a bit of a wait, I finally found the time to install the Monacor spikes onto the Visaton Clou loudspeakers…so was it worth while, did it make a difference? You bet yer sweet daddio it did!
Before I bit the bullet & installed the Monacor loudspeaker spikes, I did a quick trawl on the interweb to do a little research to make sure that speaker spikes are actually a worth while upgrade. It seems that there are a few contradicting thought processes behind what they actually achieve…regardless of the theory, most people see them as a positive addition.
How to make a simple strobe gel holder
If you’ve done any reading on the net about strobe photography, you will have seen mention of the use of gels to change the colour of the light that your strobe or flash emits. Most websites say to use tape or velcro to hold the gel onto your strobe (see more on strobist or diy photography) – this seems a tad unnecessary to me, and if you’re like me & want to use the free gel sample packs that you can get from most photography shops, this isn’t really an option…..another method is required, bring on the Simple gel holder.
Lighting Modifiers, an introduction
If you do any googling around the interweb reading about photography, you’re likely to see talk or mention of lighting modifiers. The next logical step from seeing a mention on a piece of must have equipment is to trawl a couple of online photography shops to look at prices, or to scan through ebay – your next reaction is normally one of shock horror as the prices are more than you would perhaps expect….but does it really need to be this expensive?…I don’t think so – enter the DIY photography lighting modifiers.